Characteristics of ceramic products: Australian technologies taking the lead internationally will be adopted. In the process, vertical paste injection with high pressure will also be adopted. After baked at the inlet with temperature of 1300¡æ, the products will come out with high density, low water absorption rate (lower than 0.2%). The products can be molded once, without any seam and leak. The materials used include top grade glazing materials, with smooth glazing surface, and quality pottery clay. Due to passing the radioactivity test, the harm the products do to human body will be none.

Characteristics of faucet products: The products are molded of pure brass, and will all be processed by 1/2 seven-axis automatic processing machine. Then the accuracy of the technological dimensions of main body and fittings are ensured. There is no looseness. After secondary polishing, the products are more smooth and shining with corrosion-resistant performances effectively increased. Italian plating technologies have also been adopted, making the average thickness of plating layer reach 0.07 mm. KANGQIN ceramic valve cores imported from Taiwan have been used for airproof. Italian isostatic press technology has be applied to bake the products at the temperature of 1700¡æ. Inside the reticular fittings of faucet outlet, seven layers of leaking nets of stainless steel are set with fine foaming effects. The service life can reach 500 thousand times, and water-finding pressure up to 15 kilometers. The products have the advantages of with good touching sense, corrosion-resistant, noiseless. The water coming out is gentle and will not splash. The velocity of water flow is fluent and will not discomfort the hand. The products also have the advantages in the aspects of saving water and protecting the environment.

Characteristics of water piece products: The ABS imported from Korea can be molded once. These products are green products that can benefit environmental protection and are poisonous as well as wear resistant

Characteristics of bathtub products: acrylics bathtub has been molded once based on rationale of human body. The acrylics boards are imported from Taiwan, with Italian technologies for molding. The products are characterized of heat preservation, slippery proof, cleanliness, being easy for conveyance. The products are also corrosion-resistant and their shapes are not easy to change. For bathtub of cast iron, the quality porcelain enamel is imported with the advantages of wear resistance. The products are molded by Italian technologies, and are slippery resistant, wear resistant, and impact resistant. The products are not easy to be corroded, and also not easy to change the shapes and colors. For massage bathtub, original "DXD" gas pump of 750 watt and 50 hz have been imported from America as electrical motors. This pump has the advantages of saving power, and being noiseless. Air flow buttons have been adopted, to prevent accidents from happening. The design is scientific and reasonable. The outlet can adjust the best positions to massage human bodies.